一 般 介 紹：采用環氧樹脂和聚脂樹脂為主要原材料制備而成，同時具備兩者各自的獨特性能，使得生
產出的涂料膜具有極佳的裝飾性、機械性能和較強的耐腐蝕性，廣泛應用于各種室內金屬制品的涂裝。 
產 品 系 列：可提供標準型和低溫固化型粉末涂料產品�？勺龀筛吖猓�80%以上）、半光（50-80%）、平光（20-50%）無光（20%以下）的產品（可根據 用戶的需求控制光澤）。 無縫鋼管 
粉末物理性能：比重(g/cm3、25℃ )：1.4-1.7粒度分布：100%小于100微米（可根據涂裝的特殊要求進行調整）。

固 化 條 件： 標準型         180℃   （工作溫度），15分鐘
            低溫固化       160℃    （工作溫度），15分
平均覆蓋率：  9-12平方米/公斤，膜厚60微米（以100%的粉末涂料使用率計算）。

Epoxy /polyester powder coatings（環氧/聚酯混合型粉末涂料）
General introduction
This type of powder coating is prepared from the epoxy and polyester resin . It has the merits of the two coatings, which makes the filmspreapared from this type of coating more decorative and gives it good mechanical properties and anti-corrosive properly . It is widely applied in the coating for indoor metallic appliances.
Product Series
Standard and low temperature solidification type powder coating can be provided. Products of different gloss are available , namely, high gloss (above 80%), semi gloss(50-80%), flat gloss(20-50%) and no gloss(below 20%). (The gloss can be adjusted according to the customers’ to the demand.)
Physical properties of the powder 
Density(g/cm3,25℃):1.4-1.7
Granularity distribution:100%below 100μm(it can be adapted to the customers’ demand)
Curing Condition
Standard type 180℃(workpiece temperature), 15minutes low temp curing type 160℃(workpiece temperature), 15minutes
Average coating rate
9-12㎡/kg, film thickness:60μm (calculated according to 100% consuming of powder coating)
Coating performance