一 般 介 紹： 采用羧基聚脂樹脂制成的粉末涂料，具有優異的流平性、耐化學性、耐侯性和很強的耐油性。適用于汽車、摩托車、加油機和農業機械等對耐化學性、耐油性要求較高的金屬外表的涂裝.
產 品 系 列：做成高光（80%以上）、半光（50-80%）、平光（20-50%）和無光（20%以下）的產品（可根據用戶的需求控制光澤）。
粉末物理性能：比重（g/cm3、25℃）:1.4-1.7粒度分布：100%小于100微米（可根據涂裝的特殊要求進行調整)。

固 化 條 件： 200℃（工作溫度），10分鐘
平均覆蓋率：  9-12平方米/公斤，膜厚60微米（以100%的粉末涂料使用率計算）

涂膜性能

Polyurethane powder coatings（聚氨酯型粉末涂料）
General introduction
This type of powder coating is prepared from polyurethane resin . It has excellent leveling property and good resistance to chemicals, elements and oil. It can be applied in the coating on hard conditions, such as the coating for automobiles, motors, oiling machines and agricultural implements and machinery,
Product Series
Products of different gloss are available, high gloss (above 80%), semi gloss(50-80%), flat gloss(20-50%) and no gloss(below 20%). (The gloss can be adjusted according to the customers’ to the demand.)
Physical properties of the powder 
Density(g/cm3,25℃):1.4-1.7
Granularity distribution:100%below 100μm(it can be adapted to the customers’ demand)
Curing Condition
 200℃(workpiece temperature), 10minutes 
Average coating rate
9-12㎡/kg, film thickness:60μm (calculated according to 100% consuming of powder coating)
Coating performance