公司名稱：常州市艾森塑料科技有限公司
地址：江蘇省武進高新技術產業開發區龍惠路36號
聯系人：孫經理
手機：13901502010
電話：0519-86488058
傳真：0519-86488068
郵箱：
網址：www.cguc.cn
一 般 介 紹：可提供混合型、純聚酯型等多種樹脂類型的美術花紋效果粉末涂料，分別適合于戶內或戶外使用。本產品具有獨特豪華的外觀裝飾效果，能幫助掩蓋基材本身的缺陷。廣泛應用于各高檔金屬制品的涂裝。
產 品 系 列：可提供砂紋、錘紋、絲綢紋、大理石紋、金屬外觀等多種效果的產品�？筛鶕脩舻男枨筇峁┒喾N光澤的產品。
粉末物理性能：比重（g/cm3、25℃）:1.2-1.8粒度分布：100%小于100微米（可根據涂裝的特殊要求進行調整）
固 化 條 件：根據產品的樹脂類型而定，具體請參觀產品的隨附說明。
平均覆蓋率：7-10平方米/公斤，膜厚80微米（以100%的粉末涂料使用率計算）
涂臘性能：
檢測項目 | 檢驗標準或方法 | 檢驗指標 |
抗沖擊性 | GB/T 1732-1993 | 30-50kg.cm |
杯突實驗 | GB 9753-1988 | 6mm |
附著力（劃格法） | GB/T 9286-1998 | 0級 |
彎曲 | GB 6742-1986 | 3mm |
鉛筆硬度 | GB/T 6739-1996 | 1H-2H |
鹽霧實驗 | GB 1771-1991 | >500小時 |
濕熱實驗 | GB 1740-1989 | >1000小時 |
1.以上實驗采用0.8毫米厚經標準前處理的冷軋鋼板,涂膜厚度為60-80微米。 | ||
2.以上涂膜的性能指標可能會隨著美術效果和樹脂類型的不同而有所變化。 | ||
Artistic powder coatings（美術型粉末涂料）
General introduction
Artistically veined powder coating of mixed type, polyester type and other types are available. They are suitable for indoor and outdoor use respectively. Artistic powder coating has special decorative effects of luxury appearance, which can help to cover up the defects of the substrate. It is widely used in the coating for various top grade metallic appliances.
Product Series
Products with various appearance like sand vein, hammer vein, silk vein, marble vein and metallic vein are available. Products of different gloss can be provided according to the customers’ to the demand.
Physical properties of the powder
Density(g/cm3,25℃):1.2-1.8
Granularity distribution:100%below 100μm(depending on the demand of art effects. It can be adapted to the specific demand of coating.)
Curing Condition
Depending on the types of different products. For detailed information, plese check the instruction book attached to our products.
Average coating rate
7-10㎡/kg, film thickness:80μm (calculated according to 100% consuming of powder coating)
Coating performance
Testing items | Standards and methods | Inspecting index |
Impact strength | GB/T 1732-1993 | 30-50kg.cm |
ERICHSEN TEST | GB 9753-1988 | 6mm |
Adhesion(CHECKED TEST) | GB/T 9286-1998 | Grade0 |
Bending resistance | GB 6742-1986 | 3mm |
Pencil hardness | GB/T 6739-1996 | F-H |
Salt mist resistance | GB 1771-1991 | >500h |
Heat & moisr resistance | GB 1740-1989 | >1000h |
Notations | ⒈The tests above used the cold rolling steel plate of 0.8mm thick with preceding standard treatment. The thickness of the coaring layer is 60-80μm | |
2. The above property index may slightly vary with the variation of the product types and artistic effects. | ||
