一 般 介 紹：采用羧基聚脂樹脂制成的粉末涂料，通常被稱為耐侯型粉末涂料。主要用于建筑門窗、幕 墻鋁材、鋁天花板、飛機場戶外設施、道路護欄、隔離裝置、市政工程設施、燈箱、空調室外機、室外健身休閑器材、割草機等。
產 品 系 列：可提供高光（80%以上）、半光（50%-80%）、平光（20%-50%）和無光（20%以下）的產品。（可根據用戶的需求控制光澤）
粉末物理性能：比重（g/ cm3、25℃）:1.4-1.7 粒度分布：100%小于100微米（可根據涂裝的特殊要求進行調整）
固 化 條 件： 200℃（工作溫度），10分鐘
平均覆蓋率：  9-12平方米/公斤，膜厚60微米（以100%的粉末涂料使用率計算）。

涂膜性能

For aluminum powder coatings（室外鋁材專用粉末涂料）
General introduction
This type of coating is prepared from carboxyl polyester resin. It is often called whetherable powder coating. Its applied range includes airfield facilities, road protective fence, separating unit, municipal engineering establishment, lamp shell, ail conditioner outdoor equipment, outdoor sport and leisure facilities, mower and so on..
Product Series
Products of different gloss are available, high gloss (above 80%), semi gloss(50-80%), flat gloss(20-50%) and no gloss(below 20%). (The gloss can be adjusted according to the customers’ to the demand.)
Physical properties of the powder 
Density(g/cm3,25℃):1.4-1.7
Granularity distribution:100%below 100μm(it can be adapted to the specific demand of coating)
Curing Condition
 200℃(workpiece temperature), 10minutes 
Average coating rate
9-12㎡/kg, film thickness:60μm (calculated according to 100% consuming of powder coating)
Coating performance