一 般 介 紹： 可提供混合型、純聚酯型等多種樹脂類型的金屬效果粉末涂料，分別適合于用戶內或戶外使用。本產品具有獨特豪華的外觀裝飾效果，廣泛應用于各種高檔金屬制品、戶外家具、IT行業的涂裝。
產 品 系 列：可提供高光（80%）、半光（50-80%），平光（20-50%）和無光（20%以下）的產品。也根據用戶的需求控制光澤。
粉末物理性能：比重（g/cm3、25℃）:1.4-1.7粒度分布：100%小于100微米（可根據涂裝的特殊要求進行調整）
固化條件：200℃（工作溫度），10分鐘
平均覆蓋率：9-12平方米/公斤，膜厚60微米（以100%的粉末涂料使用率計算）
涂膜性能：

Metallic effect powder coatings（金屬型粉末涂料）
General introduction
Hybrid and polyster type of such kind of powder coating are available. They are suitable for indoor use and outdoor use respectively. This type of powder coating has special decorative effect of luxury appearance, and it can be widely employed in the coating for various top-grade metallic appliances.
Product Series
Products of different gloss are available, high gloss (above 80%), semi gloss (50-80%), flat gloss(20-50%) and no gloss(below 20%). (The gloss can be adjusted according to the customers’ to the demand..
Physical properties of the powder 
Density(g/cm3,25℃):1.4-1.7
Granularity distribution:100%below 100μm(it can be adapted to the specific demand of coating)
Curing Condition
 200℃(workpiece temperature), 10minutes 
Average coating rate
9-12㎡/kg, film thickness:60μm (calculated according to 100% consuming of powder coating)

Coating performance